我們要是做圍擋的話，經常是需要將工地施工圍擋要做成彎曲弧形來適應安裝環境的，因為這樣做事更加的有美感而且也是更加的漂亮一些的。但是很多時候我們卻不能這么做，因為工地施工圍擋的里面是加了鋼材的，那么很少有鋼材是可以做到彎曲的，那么這個就是他的一個限制性的條件了。

If we do enclosure, we often need to make the construction enclosure of the construction site into a curved arc to adapt to the installation environment, because it is more beautiful and more beautiful. But many times we can't do this, because steel is added to the construction enclosure of the construction site, so few steel can be bent, so this is a limiting condition.

并且我們工地施工圍擋廠家說工地施工圍擋還是有很多的優點的，他是可以沒有油漆和維修的，不管是新的和舊的，都免去您的保養疲勞和麻煩，是比較的低的綜合成本。工地施工圍擋不需要除銹和油漆，只需要定期用水和洗滌劑清洗就可以了。工地施工圍擋具有足夠的強度和抗沖擊性能，使工地施工圍擋兼具鋼的強度和美觀。

Moreover, our site construction fence manufacturer said that there are many advantages for the site construction fence. It can be free of paint and maintenance. Whether it is new or old, it will save you fatigue and trouble in maintenance, which is relatively low comprehensive cost. The construction enclosure on the construction site does not need rust removal and painting, but only needs to be cleaned regularly with water and detergent. The construction enclosure at the construction site has sufficient strength and impact resistance, so that the construction enclosure at the construction site has both the strength and beauty of steel.

那么遇到需要彎曲的地方怎么辦呢?我們可以采用一些連接的部件進行相互的鏈接，使得我們的工地施工圍擋能夠任意方向的擺放，這樣在一定程度上也是能夠與安裝環境相契合的，雖不能做到十分的好看，但是在安裝上注意使用，也能夠起到很好的效果。并且這樣一來他的優點也是保留下來了，而且圍擋的使用的壽命也是很不錯的。

So what should we do when we meet the place that needs bending? We can use some connecting parts to link with each other, so that our construction fence can be placed in any direction, which is also compatible with the installation environment to a certain extent. Although it can not be very beautiful, it can also play a very good role in the installation. In this way, its advantages are also preserved, and the service life of the enclosure is also very good.

圍擋采用非磚墻圍蔽的，鼓勵采用可再生循環利用的預制板新型材料及鋼架可裝配式材料進行圍蔽，圍蔽高度不得低于2.5米，圍擋擋板之間的連接縫隙不能大于兩厘米左右。圍板柱頂應設置造型，每隔一根立柱須在柱頂安裝圓型燈具，電壓應低于36V，并采取措施保證用電，各單元四邊須加固壓邊。

If the enclosure adopts non-brick wall enclosure, it is encouraged to use renewable recycled prefabricated slab new materials and steel frame assemblable materials for enclosure. The enclosure height shall not be less than 2.5 meters, and the connection gap between the enclosure baffles shall not be more than two centimeters. Shape shall be set at the top of the coaming column, and circular energy-saving lamps shall be installed at the top of every column, with the voltage lower than 36V, and measures shall be taken to ensure the safety of electricity use, and the four sides of each unit shall be reinforced and pressed.

在圍擋施工的時候，施工完畢，立柱和板塊要保證在同一水平線上，前后的誤差不能大于5厘米，每一個板塊和立柱之間的地面不能出現松動的情況，圍擋立柱和圍擋擋板之間要保證安裝特別牢固，不會出現松動，圍擋的高度一定要保持一致，而且在焊接的地方一定要處理的特別干凈。關注我們http://www.48ad.com，帶您了解更多事項！

During the construction of the enclosure, after the construction, the column and the plate shall be on the same horizontal line, and the error between the front and back shall not be greater than 5 cm. The ground between each plate and the column shall not be loose. The installation between the enclosure column and the enclosure baffle shall be particularly firm, and there shall be no looseness. The height of the enclosure must be consistent, and the welding place must be treated particularly clean. Follow us http://www.48ad.com , take you to learn more!